LEAN AUDIO No.1 for PA Loudspeakers, Guitar Speakers, Bass Guitar Speakers & HI FI speakers

Product 3/10

Previous
Return to the Product List
Next

BMS 4510ND 4" Neodymium Planar Wave Driver, 1,75" VC, 80 W AES, 114 dB 8 Ohm

£248.79

Quantity:

BMS 4510 4" Neodymium Planar Wave Driver, 1,75" VC, 80 W AES, 114 dB 8 Ohm

Features:


  • Unique Planar Wave Design (patent pending)
  • Neodymium Magnet Assembly
  • Perfect acoustical coupling of individual units to create virtually continuous line source
  • 112 dB sensitivity 1 W / 1 m
  • 1 kHz Crossover
  • Extended high frequency response up to 20 kHz
  • 8 Ohm

The BMS 4510ND Planar wave driver radiates a coherent planar wave front form a rectangular piston without internal diffraction for superior dispertion control and high fidelity sound. This distinctive new transducer was engineered to work with 4-inch (4" x 1") rectangular throat waveguides providing extremely high sensitivity.

The 4510ND is optimised for 10° vertical dispertion and allows a horizontal coverage from 60° to 120° depending on the waveguide used. The unique design of the 4510ND planar wave driver allows perfect acoustical coupling of individual units to create virtually continuous line source. The driver contains a high energy neodymium magnet system and a unique annular ring diaphragm. The ring diaphragm works similar as a wound 140 mm long ribbon diaphragm providing linear frequency response up tp 20 kHz. The unique planar wave phase plug provide a coherent planar wave front without internal diffraction.


Specifications:


  • Throat diameter: 4" x 1" (101.6 x 25.4 mm) rectangular piston
  • Nominal impedance: 8 Ohm
  • Power capacity (AES): 80 W
  • Peak Power: 450 W
  • Sensitivity in: 114 dB 1 W / 1 m
  • Efficiency: 25% (1000-3500)
  • max. SPL (cont.): 133 dB at 80 W
  • Frequency range: 500 - 20000 Hz
  • Recommended crossover: 1000 Hz
  • Voice Coil Diameter: 1.75" (44.4 mm)
  • Magnet Material: Neodymium
  • Flux density high-range: 2.2 Tesla
  • Voice Coil Material: Copper Clad Aluminum (2 layers inside and outside of the VC)
  • Voice Coil Former: Kapton TM
  • Diaphragm Material: Polyester

Mounting Information:


  • Overall Dimensions: 160 x 85 x 118 mm
  • Net Weight:1.3 kg
  • 4 x M5 holes 90° on 101.6 mm 4" diameter


Please Choose:



  • 1 Units in Stock
Email: [email protected] Tel: +44 (0)1473 744089
Copyright © 2023 Lean Business Audio Limited.
Lean Business Audio is a Limited company registered in England and Wales. Registered number: 04991687.
18 The Sterling Complex, Farthing Road Industrial Estate, Ipswich, IP1 5AP.